Conjugate Heat Transfer is the simultaneous simulation of heat conduction in solid materials and convective heat transfer in the surrounding fluid — coupling the solid-domain temperature field (governed by the heat diffusion equation) with the fluid-domain velocity and temperature fields (governed by the Navier-Stokes and energy equations) at their shared interface, providing accurate thermal predictions for electronics cooling where heat flows from solid components into moving air or liquid coolant.

What Is Conjugate Heat Transfer?

• Definition: A multi-physics simulation approach that solves heat conduction in solids and convective heat transfer in fluids simultaneously, with continuous temperature and heat flux at the solid-fluid interface — rather than treating conduction and convection as separate problems with assumed boundary conditions, conjugate analysis captures their mutual interaction.
• Why "Conjugate": The term means "joined together" — the solid and fluid thermal solutions are coupled (conjugated) at their shared boundary, where the solid surface temperature determines the fluid heat transfer and the fluid flow determines the solid surface temperature. Neither can be solved accurately without the other.
• Interface Condition: At the solid-fluid boundary, two conditions must be satisfied simultaneously: temperature continuity (T_solid = T_fluid at the surface) and heat flux continuity (q_solid = q_fluid at the surface) — the conjugate solver enforces both conditions iteratively.
• vs. Decoupled Analysis: Traditional thermal analysis often assumes a fixed convection coefficient (h) on solid surfaces — conjugate analysis computes h locally from the actual fluid flow, which varies across the surface and depends on geometry, flow velocity, and turbulence.

Why Conjugate Heat Transfer Matters

• Accuracy: Assumed convection coefficients can be wrong by 2-5× in complex geometries — conjugate analysis computes the actual local heat transfer from first principles, providing temperature predictions accurate to within 2-5°C versus 10-20°C for decoupled methods.
• Heat Sink Design: The convection coefficient varies dramatically across a heat sink — high at the leading edge of fins, low in recirculation zones, and dependent on fin spacing. Only conjugate analysis captures these variations accurately.
• Liquid Cooling: Cold plate and microchannel cooling performance depends strongly on the interaction between fluid flow and solid conduction — conjugate analysis is essential for predicting pressure drop, temperature uniformity, and cooling capacity.
• 3D IC Thermal: In 3D-stacked packages with microfluidic cooling, the interaction between solid conduction through silicon and fluid convection in microchannels determines the temperature distribution — conjugate analysis is the only accurate approach.

Conjugate Heat Transfer in Electronics

Conjugate heat transfer simulation is the gold standard for electronics thermal analysis — coupling solid conduction and fluid convection at their shared interfaces to provide the accurate temperature predictions needed for designing heat sinks, cold plates, and cooling systems that reliably manage the thermal loads of modern high-power processors and AI accelerators.