Pressure Cooker Test (PCT) is the industry colloquial name for the autoclave reliability test — referring to the JEDEC JESD22-A102 test that exposes semiconductor packages to 121°C, 100% RH, and 2 atmospheres of saturated steam pressure, named for its similarity to a kitchen pressure cooker that uses pressurized steam to accelerate cooking, and used as a quick screening test for evaluating the moisture resistance of mold compounds, die attach materials, and package sealing integrity.

What Is PCT?

• Definition: An informal industry term for the autoclave test (JESD22-A102) — the test chamber operates exactly like a kitchen pressure cooker, using pressurized saturated steam at 121°C and 2 atm to force moisture into semiconductor packages at an accelerated rate.
• Synonym for Autoclave: PCT and autoclave testing are the same test — the term "pressure cooker test" is used informally in engineering discussions and some older specifications, while "autoclave" is the formal JEDEC terminology.
• Quick Screening: PCT is often used as a rapid development screening test — 24-48 hours of PCT can quickly reveal moisture vulnerabilities in new mold compounds or package designs before committing to the full 96-240 hour qualification test.
• Unbiased: Like autoclave, PCT is performed without electrical bias — testing only the physical and chemical effects of extreme moisture exposure on package integrity.

Why PCT Matters

• Material Screening: PCT is the fastest way to evaluate moisture resistance of new packaging materials — a 24-hour PCT exposure can differentiate between good and poor mold compounds, saving weeks compared to THB or HAST testing.
• Delamination Check: PCT rapidly reveals delamination at weak interfaces — post-PCT C-SAM imaging shows whether moisture has penetrated between mold compound and die, lead frame, or substrate.
• Process Validation: PCT validates that manufacturing processes (mold cure, plasma clean, adhesive application) produce adequate adhesion — process deviations that weaken adhesion are quickly detected by PCT.
• Incoming Quality: Some companies use short PCT exposures (24-48 hours) as incoming quality checks on mold compound and substrate lots — ensuring material consistency before production use.

PCT Test Applications

PCT is the quick-and-dirty moisture screening test that every packaging engineer knows — using pressurized steam to rapidly evaluate package moisture resistance in hours rather than weeks, serving as the go-to development tool for material selection, process validation, and incoming quality verification in semiconductor packaging.