Atomic Layer Etching (ALE)

Keywords: atomic layer etching ale,layer by layer etching,self limiting etch,isotropic ale,anisotropic ale

Atomic Layer Etching (ALE) is the self-limiting etch process that removes material one atomic layer at a time through cyclic surface modification and removal steps — providing angstrom-level etch control, excellent uniformity (±0.5Å across wafer), and minimal damage for critical applications including gate recess, fin reveal, spacer formation, and contact opening at 7nm, 5nm, 3nm nodes where conventional RIE lacks precision.

ALE Process Fundamentals:

• Two-Step Cycle: Step 1 (Modification): chemisorb reactive species on surface, forms self-limiting modified layer (typically 1-3Å thick); Step 2 (Removal): remove modified layer via ion bombardment, thermal desorption, or chemical reaction; repeat cycles until target depth reached
• Self-Limiting: modification step saturates at monolayer coverage; prevents runaway etching; provides atomic-level control; key advantage over continuous plasma etching
• Etch Per Cycle (EPC): typical EPC 0.5-2Å depending on material and chemistry; silicon EPC ~1Å, SiO₂ EPC ~0.8Å; precise control enables <1nm total etch depth accuracy
• Cycle Count: etch depth = EPC × number of cycles; 10nm etch requires 50-100 cycles at 1-2Å EPC; process time 5-15 minutes; slower than RIE but necessary for critical steps

Thermal ALE (Isotropic):

• Process: alternating exposure to reactant gas (e.g., Cl₂, HF) and inert purge; thermal energy drives reactions; no plasma; isotropic etch (equal in all directions)
• Silicon Thermal ALE: Cl₂ adsorption forms SiClₓ surface layer; Ar purge removes excess Cl₂; heat (300-500°C) desorbs SiCl₄; EPC ~1Å; used for Si surface cleaning, defect removal
• SiO₂ Thermal ALE: HF vapor forms SiF₄; trimethylaluminum (TMA) ligand exchange; alternating HF/TMA cycles; EPC ~0.8Å; room temperature process; used for oxide recess, gate oxide thinning
• Applications: isotropic etch for surface preparation, defect removal, oxide thinning; not suitable for anisotropic features (trenches, vias)

Plasma ALE (Anisotropic):

• Process: alternating plasma modification and ion bombardment removal; directional etch; anisotropic profile; used for high aspect ratio features
• Modification Step: plasma generates reactive radicals (Cl, F, O); chemisorb on surface; form modified layer (oxide, fluoride, chloride); self-limiting at monolayer; typical 1-5 seconds
• Removal Step: low-energy ion bombardment (20-100eV Ar⁺); removes modified layer; minimal damage to underlying material; directional removal; typical 1-5 seconds
• Cycle Optimization: balance modification and removal; incomplete modification leaves residue; excessive removal damages substrate; process window ±10-20%

Material Selectivity:

• Si:SiO₂ Selectivity: >50:1 achievable with optimized chemistry; Cl-based chemistry etches Si, stops on SiO₂; critical for fin reveal, gate recess
• SiN:SiO₂ Selectivity: >20:1 with fluorocarbon chemistry; enables spacer formation, contact opening; selectivity higher than RIE (5-10:1)
• Metal Selectivity: TiN, TaN, W selective etch demonstrated; <5:1 selectivity typical; challenging due to similar chemistry; active research area
• Damage Reduction: low ion energy (<100eV) minimizes subsurface damage; <1nm damaged layer vs 3-5nm for RIE; critical for maintaining device performance

Equipment and Implementation:

• ALE Reactors: modified plasma etch tools (Lam Research, Applied Materials, Tokyo Electron); fast gas switching (<0.5s); precise ion energy control; temperature control (20-400°C)
• Lam Syndion: dedicated ALE platform; <0.3s gas switching; 20-1000eV ion energy; in-situ metrology; production-proven for 7nm/5nm
• Applied Materials Selectra: selective etch platform with ALE capability; optimized for high selectivity applications; integrated metrology
• Throughput: 30-60 wafers/hour depending on cycle count; slower than RIE (60-120 WPH) but acceptable for critical steps; 5-10% of total etch steps use ALE

Process Control and Metrology:

• Endpoint Detection: optical emission spectroscopy (OES) monitors etch progress; interferometry for film thickness; challenging due to small EPC; cycle counting primary method
• Uniformity: ±0.5Å (3σ) across 300mm wafer; 5-10× better than RIE (±2-5Å); enabled by self-limiting chemistry; critical for device matching
• Repeatability: ±0.3Å wafer-to-wafer; excellent process control; deterministic cycle-based process; minimal drift
• In-Situ Monitoring: ellipsometry, reflectometry track film thickness real-time; enables adaptive process control; compensates for incoming variation

Applications at Advanced Nodes:

• Fin Reveal: etch sacrificial oxide to expose Si fins; requires <1nm depth control; Si:SiO₂ selectivity >50:1; ALE standard process for 7nm/5nm FinFET
• Gate Recess: etch poly-Si gate to precise depth; ±0.5nm tolerance; critical for threshold voltage control; ALE enables <1nm depth accuracy
• Spacer Formation: selective etch of SiN spacer; high SiN:SiO₂ selectivity; anisotropic profile; ALE provides better profile control than RIE
• Contact Opening: etch through ILD to contact; stop on metal or Si; high selectivity required; ALE reduces contact resistance by minimizing damage

Challenges and Limitations:

• Throughput: 5-15 minutes per wafer vs 1-3 minutes for RIE; limits adoption to critical steps; cost-performance trade-off
• Chemistry Development: each material requires unique chemistry; limited chemistries available; extensive development needed for new materials
• Aspect Ratio: ion bombardment step can cause aspect ratio dependent etching (ARDE); limits application to <20:1 aspect ratio; higher AR requires optimization
• Cost of Ownership: slower throughput increases CoO; offset by improved yield and device performance; justified for critical steps

Future Developments:

• Selective ALE: area-selective ALE that etches only specific materials or regions; eliminates masking steps; active research; potential for self-aligned processes
• High Aspect Ratio ALE: improved ion directionality for >50:1 aspect ratio; required for 3D NAND, DRAM; neutral beam ALE under development
• Metal ALE: precise metal etch for advanced interconnects (Co, Ru); challenging chemistry; critical for future nodes
• Faster Cycles: <1 second per cycle target; requires faster gas switching and pumping; would improve throughput 2-3×

Industry Adoption:

• Logic: Intel, TSMC, Samsung use ALE for fin reveal, gate recess at 7nm and below; 5-10 ALE steps per device; critical for yield
• DRAM: SK Hynix, Samsung, Micron use ALE for capacitor contact opening; 18nm DRAM and below; high selectivity essential
• 3D NAND: ALE for channel hole etch, slit etch; high aspect ratio challenges; limited adoption; conventional RIE still dominant
• Market: ALE equipment market $500M-1B annually; growing 15-20% per year; driven by advanced node adoption

Atomic Layer Etching is the precision tool that enables atomic-scale manufacturing — by removing material one layer at a time with self-limiting chemistry, ALE provides the angstrom-level control and minimal damage required for critical process steps at 7nm and beyond, where conventional etching techniques lack the precision to maintain device performance and yield.

Source: ChipFoundryServices — Search this topic — Ask CFSGPT