Dual Sourcing
Dual sourcing is the practice of qualifying a chip design at two separate foundries or process lines instead of one, so that a disruption, shortage, or geopolitical event at either site does not stop the customer's supply entirely.
It is insurance bought before the emergency, not after. Qualifying a second fab means re-validating the design against a different process design kit, running qualification lots to prove yield and reliability match the primary site, and often splitting ongoing volume between both, which costs real engineering time and money that a single-sourced design never has to spend.
This is the direct mitigation for customer and supplier concentration risk on both sides of the relationship. A fabless company dual sourcing across two foundries protects itself from being the dependent party if one fab is affected by a natural disaster, a geopolitical export restriction, or simply a capacity crunch during a shortage; a foundry whose customer dual sources loses some revenue certainty but is not the one exposed if that customer leaves entirely.
| Approach | Upfront cost | Protection level |
|---|---|---|
| Single-sourced | lowest | none — any disruption stops supply |
| Qualified but idle second source | moderate, ongoing requalification | fast switch, but spare capacity sits unused |
| Active dual sourcing | highest, split volume and double tooling | continuous protection, proven at real volume |
| Multi-foundry by design node | highest, separate masks per fab | maximum resilience, used for safety-critical parts |
The automotive industry adopted dual sourcing aggressively after the 2020-2022 shortage. Automakers that had historically single-sourced microcontrollers and power management chips to minimize cost discovered how exposed that made them when allocation queues left them behind consumer electronics customers, and many responded by requiring dual-source qualification as a standing procurement policy rather than a case-by-case decision.
Dual sourcing is rarely perfectly symmetric. A 70/30 or 80/20 split between a primary and backup fab is more common than an even split, because the primary site usually offers the better price or process maturity, and the secondary site exists mainly to prove the supply chain can fail over, not to be an equal production partner on a normal day.
Read dual sourcing through an *option value* lens rather than a *cost* lens: the extra qualification spend is not waste just because the backup fab rarely gets used at full volume, it is the price of not being the company caught at the back of an allocation queue the next time a shortage, an earthquake, or an export control hits a single fab you had no alternative to.