Apf Process
The APF process deposits Advanced Patterning Film — Applied Materials' trade name for a CVD amorphous carbon hard mask — as a sacrificial layer that stands between a thin photoresist pattern and the much deeper etch that pattern needs to survive. It exists to solve a problem lithography created on its own: as resist films got thinner to resolve finer features, they stopped being thick enough to survive the etches those features required.
The problem APF solves is a mismatch between what litho needs and what etch needs. Resolving ever-finer critical dimensions pushed resist films thinner and thinner, because a thick resist diffracts and defocuses the exposure light enough to blur fine patterns — but a thin resist simply doesn't have enough material to survive etching all the way through a thick target film underneath it. Amorphous carbon breaks that trade-off apart: the thin resist only has to pattern a thin cap layer, which then patterns the much thicker carbon film, which is what actually survives the long, deep etch into oxide, polysilicon, or a hard mask stack below. Each layer in the chain only has to be exactly as thick as its own step requires.
Carbon's real advantage is selectivity, not strength. Amorphous carbon etches very slowly relative to oxide, nitride, and polysilicon under the fluorine- and chlorine-based chemistries used to pattern those layers, which is exactly what a hard mask needs — it has to survive an etch step that's actively trying to consume everything in its path. Carbon pairs that selectivity with a property almost no other hard mask material offers: it strips away completely in an oxygen plasma ash, leaving no metal or nitride residue behind that would otherwise need its own dedicated removal step. Tungsten or titanium-nitride hard masks can deliver similar etch resistance, but getting rid of them afterward is its own process; APF's removal step is a simple ash.
APF became load-bearing for multiple patterning, not just single critical layers. Because it can be deposited thick without the optical penalties a thick resist would carry, amorphous carbon is also the material of choice as the mandrel or spacer-core film in self-aligned double and quadruple patterning schemes — the same spacer process that splits a lithography tool's native pitch in half or in quarter depends on a sacrificial core material that etches cleanly, strips completely, and doesn't contaminate the trenches it leaves behind. That combination of properties is why amorphous carbon hard masks, under APF or equivalent trade names from other equipment makers, show up throughout advanced-node front-end and back-end-of-line litho modules rather than in just one step.
Stripping APF is its own monitored step, because "ash it all off" still has an endpoint the process can't afford to miss. The carbon has to be gone completely before the next deposition, but the ash chemistry is also attacking whatever's now exposed underneath it:
That stop signal comes from watching carbon's own combustion byproducts disappear, the same closed-loop logic every endpoint-driven etch or strip step relies on:
And isolated from the loop diagram, this is the trace a strip module actually follows — carbon's combustion signature collapsing as the film runs out:
Read the APF process as the fix for a trade-off lithography couldn't solve on its own: resist thickness and pattern resolution pull in opposite directions, so rather than ask resist to do a job it physically can't, the industry inserted a disposable carbon layer whose entire purpose is to be thick exactly where the etch needs it and gone completely once the etch is done — and even that disappearance is instrumented, not assumed.