Foundry Technology Kit

A foundry technology kit (FTK) is the complete package a foundry assembles for a customer adopting a given process node, and it is broader than the process design kit (PDK) alone: the PDK supplies the technical files, device models, design rules, verification decks, while the FTK wraps that PDK together with reference IP (standard cells, memory compilers, I/O libraries), qualified EDA tool flows, and the foundry's own design-enablement support, everything a design team actually needs to go from a blank project to a tapeout-ready design on that specific process. Treating the PDK and the FTK as the same thing understates what a foundry relationship at a new node actually involves, since most of the engineering effort in standing up a new design on a new node happens in the layers the FTK adds around the PDK, not inside the PDK's files themselves.

The FTK Wraps the PDK in Everything Else a Design Needs PDK is the core technical file set — FTK is the complete customer deliverable PDK (core) device models design rules (DRC/LVS) parasitic extraction decks standard-cell layout rules Foundry Technology Kit (FTK) — everything inside this boundary Reference IP standard cells, memory compilers, I/O libraries Qualified EDA flows tool/version combinations validated on this node Design enablement foundry support team, reference flows/examples MPW/qualification access shuttle runs, process qualification data The PDK is necessary but not sufficient — the surrounding FTK components are what make a design actually tapeout-ready.

This distinction matters most at the moment a design team actually starts a new project on an unfamiliar node, which is exactly when the gap between "has the PDK" and "has everything needed to tape out" becomes visible. A team with only the PDK's technical files still has to separately source or build standard-cell libraries and memory compilers, separately qualify an EDA tool flow against that specific process version, and separately navigate the foundry's own qualification and multi-project-wafer access process, each of which is a real, often multi-month undertaking that the FTK is specifically assembled to shortcut by bundling all of it together as a single customer deliverable.

Customer commits to a new process node
needs everything required to go from blank project to tapeout
FTK bundles the full deliverable around the PDK coreeach component addresses a separate real gap PDK-alone leaves open
PDK
device models, design rules, verification decks
Reference IP + qualified EDA flows
standard cells, memory, validated tool versions
Design enablement + MPW/qualification access
foundry support, shuttle-run access to actually tape out
Design team has everything needed to reach tapeout
the specific gap an FTK, not a bare PDK, closes

This is why foundry-customer relationship agreements and node-adoption timelines are typically negotiated around FTK delivery milestones rather than PDK file-release dates alone, since a PDK release with no accompanying qualified IP or tool flow still leaves a design team unable to actually start meaningful work, making FTK completeness, not PDK availability by itself, the real gating factor for when a new node becomes usable by outside customers.

ComponentSupplied byWhat it specifically unlocks
PDKFoundry (core technical files)Accurate simulation and rule-correct layout
Reference IPFoundry or third-party IP vendorsUsable building blocks instead of custom-designed primitives
Qualified EDA flowsFoundry + EDA vendor co-validationConfidence the design tools actually work on this process
Design enablement / MPW accessFoundry support organizationPractical path to an actual tapeout and first silicon

A foundry technology kit is the complete commercial and engineering deliverable that makes the process design kit covered elsewhere on this site actually usable — understanding this distinction is what separates "the foundry released the PDK" from "the foundry node is actually ready for outside customers to design on."

Take foundry technology kit further

Ask the copilot about this term, or have our engineers assess it against your process.