Epitaxial Silicon Process
The epitaxial silicon process grows single-crystal silicon directly on a single-crystal substrate, continuing the exact crystal orientation of whatever's underneath rather than forming the random grain structure of polysilicon or the no-structure-at-all of amorphous silicon. That inherited crystallinity is the whole point: epitaxy lets a fab deposit silicon with a controlled, independent doping profile — or a controlled lattice mismatch — on top of a substrate it couldn't simply dope or strain the same way by itself.
Blanket epitaxy's original job was fixing a problem buried deep in the substrate, not anything happening at the transistor surface. CMOS built directly on a lightly doped wafer is vulnerable to latch-up — a parasitic thyristor structure, formed inadvertently by adjacent NMOS and PMOS wells, that can short the power supply once triggered. Growing a lightly doped epitaxial layer on top of a heavily doped substrate gives the substrate a low-resistance path that shunts stray current away before it can sustain the latch-up loop, while the lightly doped epi surface above it is still what actual transistors get built into. This epi-on-heavily-doped-substrate structure was close to universal in CMOS logic for decades specifically because it was cheaper than redesigning well structures to solve the same problem a different way.
Selective epitaxial growth does something blanket epi can't: it grows silicon with a deliberately different lattice constant than the substrate, and that mismatch itself becomes a strain-engineering tool. Etch a recess into the source and drain regions beside a transistor's channel, then selectively grow epitaxial silicon-germanium (SiGe) only in that recess, and the SiGe's slightly larger natural lattice constant forces it to compress as it bonds to the surrounding silicon crystal — pushing that compressive strain directly into the adjacent channel. Grow silicon-carbon (Si:C) instead, with carbon's smaller atomic radius pulling the lattice the opposite direction, and the strain transmitted to the channel is tensile instead.
Embedded S/D epi and the dual-stress nitride liner solve the same mobility problem from two different directions, and leading-edge logic nodes have historically used both at once. The nitride liner strains the channel from above, through the gate stack, with a film whose stress is independent of the transistor's own materials; embedded epi strains the channel directly, built into the source and drain crystal right next to where the strain actually needs to act. SiGe PMOS epi arrived first, as early as the 90 nm node, well before dual stress liners became mainstream, and the two techniques stack — a SiGe-strained PMOS source/drain combined with a compressive nitride liner reinforces the same compressive strain through two independent mechanisms rather than competing for the same budget.
Selectivity is what makes "selective" epitaxial growth selective, and it's a real process discipline, not just a description. The growth chemistry has to deposit single-crystal silicon (or SiGe, or Si:C) only where it's exposed to crystalline silicon, while depositing nothing — or etching away what little does nucleate — on the oxide or nitride masking everything else on the wafer. Getting that selectivity right, typically through a deposition/etch/deposition cycle using HCl or Cl2 to attack any polycrystalline or amorphous nucleation on the dielectric faster than it attacks the intended single-crystal growth, is what lets SEG fill a recessed source/drain cleanly without leaving stray silicon residue bridging adjacent devices.
Read the epitaxial silicon process as the step that turns "what's already there" into a design variable: blanket epi gave CMOS a substrate structure immune to latch-up without redesigning the wells, and selective epi later turned the same crystal-continuation mechanism into a strain-engineering tool, growing a slightly mismatched lattice exactly where a transistor's channel needed to be stretched or squeezed, independent of whatever film sits above the gate.